About the Crux SWRNS-63S Wiring Interface
Add a new radio
Add a new radio
Installing a new car stereo can often mean losing important features in your vehicle. Crux's SWRNS-63S wiring interface solves this problem, allowing you to install a new receiver while retaining your Nissan's steering wheel audio controls and backup camera.
Connect this interface to the wires on your new car stereo's wiring harness, and you've covered the power, ground, and factory speaker connections for your new stereo. This interface also supplies the reverse, illumination, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need if you're installing a navigation receiver. The interface does not work with Nissan amplified systems.
Product highlights:
- connect a new stereo in select 2017-18 Nissan Sentra vehicles
- retains your steering wheel audio controls with select car stereos
- retains factory backup camera
- provides Vehicle Speed Sensor (V.S.S.), reverse gear, and illumination connections for installing navigation receivers
- warranty: 1 year
- MFR # SWRNS-63S
What's in the box:
Crux SWRNS-63S Wiring Interface owner's manual
- Radio replacement interface module
- Wiring harness
- 2 SWC harnesses
- Antenna adapter
- USB retention cable
- Installation Instructions
Customer reviews for Crux SWRNS-63S Wiring Interface
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Crux SWRNS-63S Wiring Interface
Product Research
Features
Nissan Radio Replacement Interface: The CRUX SWRNS-63S is a radio replacement interface for select 2013-2019 Nissan vehicles. It facilitates the integration of an aftermarket radio to enable retention of factory features when replacing a factory installed radio in select Nissan vehicles. This interface is also pre-programmed for retention of steering wheel controls.
Vehicle Compatibility: The CRUX SWRNS-63S is supported by the following 2013-2019 Nissan vehicles.
Make | Model | Year | |
---|---|---|---|
Nissan | Altima | without Bose and without Nav | 2013-2017 |
with Bose and without Nav | |||
Rogue | without Bose and without Nav | 2014-2016 | |
with Bose and without Nav | |||
Murano (Base model with Display Radio) | 2015-2016 | ||
Sentra (without Bose, without Nav, and without CarPlay) | 2017-2018 | ||
Versa (without Nav) | 2014-2019 |
Note: The CRUX SWRNS-63S is not compatible with vehicles that feature built-in navigation.
For Amplified and Non-Amplified Applications: The CRUX SWRNS-63S can be used in Nissan vehicles with or without a factory Bose amplified audio system. The SWRNS-63S will retain the factory Bose amplifier with fader capability and turn-on.
Steering Wheel Control Retention: The CRUX SWRNS-63S features a steering wheel control output for Pioneer, Sony, Alpine, Clarion, Kenwood, JVC, Jensen, Dual/Axxera, Boss and other aftermarket head units. The steering wheel control output consists of a right-angle 3.5mm connector and a light blue/yellow wire (use the connection that your aftermarket head unit is fitted with). The SWRNS-63S interface module will work with any of the listed aftermarket head unit brands by setting its 3 dip-switches to the proper position (see owner's manual for appropriate setting).
- There are two steering wheel control harnesses; one is labeled "Pioneer/Sony" and the other "Kenwood/JVC". You will only plug in one of these harnesses into the interface module, based on the brand of aftermarket head unit you are installing.
- Some factory steering wheel control functions may not be retained when installing an aftermarket Jensen radio.
Factory Backup Camera: The CRUX SWRN-63S will retain your vehicle's factory backup (if equipped). Your aftermarket receiver must feature a composite video camera input and have a built-in display monitor.
Note: The factory 360 panoramic camera (if equipped) is not retained.
USB Port: The CRUX SWRN-63S will also retain your vehicle's factory USB port using the included USB retention cable. As long as your new car stereo has a high-amperage charging port (1.5A or greater), the USB retention cable should support Apple CarPlay and Android Auto operation. However, the number of variables involved means we can't guarantee compatibility.
Aux Input: In addition, the SWRN-63S retains your vehicle's factory Aux input through the use of your aftermarket receiver's rear-panel audio input. The SWRNS-63S features male stereo RCA jacks to plug into the audio input on back of your aftermarket radio. If your aftermarket stereo is equipped with a stereo minijack input, you'll need a female stereo RCA to male stereo minijack adapter (sold separately).
Navigation Outputs: CRUX SWRNS-63S features a VSS (Vehicle Speed Sense) wire and Reverse Output wire to make the installation of aftermarket multimedia and navigation receivers simpler and faster.
Note: The CRUX SWRNS-63S does not offer a Parking Brake wire.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...